Cannondale SystemSix Carbon HM Red ETAP AXS 2020 CHP road bike
Fork: SystemSix, Ballistec Hi-MOD Carbon, 1-1 / 8" - 1 -1/4" steerer, 12x100mm Speed Release thru-axle, flat mount disc, 55mm offset (47-51cm) 45mm offset (54-62cm)
Cranks: SRAM RED Carbon, 48/35
Middle composition: SRAM RED DUB PF30
Derailleur: SRAM RED stage AXS
Derailleur: SRAM RED stage AXS, Brage-on
Shifters: SRAM RED stage AXS HRD, 2x12
Cassette: SRAM XG-1290, 10-28, 12-speed
Chain: SRAM RED, 12-speed
Brakes: SRAM RED stage AXS HRD, 160 / 160mm Centerlock rotors
Brake levers: SRAM RED stage AXS HRD
Rims: HollowGram KNOT64 Rim, Carbon, 20h front, 24h rear, 64mm deep, 21mm ID, tubeless ready
Hubs: (F) HollowGram KNOT, sealed bearing 12x100 centerlock / (R) HollowGram KNOT, 12x142 centerlock w / DT Swiss internals, SRAM XDR driver
Wires: DT Swiss Aerolite, straight pull
Tires: Vitt Oria Rubino Pre Speed, 700 x 26mm (23c)
Pedals: no
Handlebars: Cannondale KNOT SystemBar, carbon, 8 ° pitch adjust
Stem: Cannondale KNOT SystemBar, alloy w / cable cover
Head composition: Tapered, 1-1 / 8" upper, 1-1 / 4" lower bearing
Saddle: Prologue Dimension NDR, 143mm width, Tirox rails
Seatpost: Cannondale KNOT Carbon, 330mm
Color: CHP
Extras: Cannondale Wheel Sensor
Model year | 2020 |
Gears | 2x12 |
Groupset | SRAM Red |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 96393 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews