Cannondale Super Six EVO Tiagra 2016 road bike
Low weight, high stiffness of the composite frame Ballistec carbon, Shimano Tiagra, 2x10 speed, favorable price.
The Ballistec carbon composite frame uses the same carbon fiber structure as the Hi-Mod variant, but has a higher weave ratio with a medium strength modulus. Even so, the weight of the frame is 980 g. The SPEED SAVE front fork weighs 315 g and also stands out for its low weight and high absorption of bumps.
The Super Six Evo is designed for dedicated racers looking for top performance carbon frames at an affordable price.
Model year: 2016
Frame: SuperSix EVO, BallisTec Carbon, SPEED SAVE, PressFit BB30
Fork: SuperSix EVO, BallisTec Carbon, SPEED SAVE, 1-1/8" to 1-1/4" steerer
Cranks: FSA Gossamer, BB30, 52/36
Center composition: FSA PressFit 30
Shifters: Shimano Tiagra 4700
Cassette: Shimano HG500-10, 11-28, 10-speed.
Chain: KMC X10, 10-Speed
Derailleur: Shimano Tiagra 4700 braze-on
Derailleur: Shimano Tiagra 4700
Rims: Maddux RS 2.0
Bullets: Formula (F) RB-51, (R) RB-5711
Pedals: not available
Brakes: Shimano Tiagra 4700
Stem: Cannondale C3, 6061 Alloy, 31.8, 6 deg.
Head composition: SuperSix EVO, 1-1/4" lower bearing, 25mm top cap
Brake levers: Shimano Tiagra 4700
Wires: DT Swiss Champion
Tires: Schwalbe Lugano, 700x25c, folding
Saddle: Cannondale Stage Ergo w/ Cromo Rails
Seatpost: Cannondale C3, 6061 Alloy, 27.2x350mm
Sizes: 54, 56, 58
Model year | 2016 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
Material | carbon fiber |
product ID | 12683 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews