Cannondale Slice Ultegra 6800 road bike, SHOW
These goods are unavailable
You can try these searches
Demonstration bike, comprehensive warranty, guaranteed technical condition of the bike.
It is a demonstration bike with a range of about 200 km. More detailed photos of the wheel will be added.
Cannondale Slice is a time trial / triathlon special with an ultra light aerodynamic carbon frame. Slice is fast, stable and comfortable.
Micro-suspension rear structure Aero SAVE
Comfort = Speed. The ultra-thin Naero Tech rear strut tubes and the Airplane rear are not only extremely aero, but also provide an unrecognized level of comfort. This will keep you fresh for 180 km.
Ultralight Ballistec Carbon
The same carbon technology as our award-winning SuperSix Evo frame has reduced the weight of the frame and fork to such a level that it makes the Slice a completely own category of its kind. The result is a triathlon bike that climbs and accelerates better than most conventional road bikes.
Real Three Geometry
The new geometry of the Slice frame was created on the basis of data from thousands of measurements by the partner company Guru, which focuses on the correct adjustment of the seat. The resulting design keeps the rider in the center of the bike around the correct aerodynamic position, for the best possible stability, maneuverability and control over the wheel.
TAP pipes
The shape of the TAP tubes (cut aero profile) forms a perfect combination of aerodynamic air bypass, rigidity and low weight, while without the need for driving compromises as with other traditional aero frames. Airflow channel The small channel behind the seat tube reduces the aerodynamic drag created by the airflow between the rotating wheel and the frame, which improves the rotation of the rear wheel when driving fast.
Frame: All New Slice, BallisTec Carbon, AERO SAVE, BB30
Fork: All New Slice, BallisTec Carbon, 1-1 / 8 "
Cranks: Cannondale HollowGram Si, BB30A, FSA Chainrings, 52/36
Center composition: Cannondale Alloy PressFit30A
Gear levers: Shimano Ultegra 6800 Aero
Cassette: Shimano Ultegra 6800, 11-28, 11-speed
Chain: Shimano Ultegra 6800, 11-speed
Derailleur: Shimano Ultegra 6800, braze-on
Shifter: Shimano Ultegra 6800
Hubs: Mavic Aksium S WTS
Rims: Mavic Aksium S WTS
Brakes: Shimano Ultegra 6800
Stem: Cannondale C2, 6061 Alloy, 31.8, 6 deg.
Head composition: Slice, Si, 25mm top cap
Brake levers: Alloy Aero Levers
Wires: Mavic Aksium S WTS
Tires : Mavic WTS 700x25c
Saddle: Fiz: ik Arione TriTone, Mng Rails
Seatpost: Slice Aero carbon
Sizes: 51
Color: Exposed Unidirectional Carbon w / Blue, Abyss, Matte (01) - CRB
Product details
Groupset | Shimano Ultegra |
Gears | 2x11 |
Material | carbon fiber |
product ID | 41641 |
Horské, mestské a krosové
Veľkosť | Výška jazdca |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Veľkosť | Výška jazdca |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Veľkosť | Výška jazdca |
---|---|
Univerzálna | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews