Rocky Mountain Altitude A50 29 bike, gray/pink
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 50 % (you will save 70 €)
Rocky Mountain Altitude A50 29 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
| Frame |
FORM™ Alloy. Full Sealed Cartridge Bearings. Press Fit BB. Internal Cable Routing. 2-Bolt ISCG05 Tabs. RIDE-9™ Adjustable Geometry. 2 Position Axle. 160 mm travel. FORM™ Alloy Rear Triangle
|
| Fork |
FOX 38 Float EVOL GRIP Performance Series 170 mm, 27.5 = 37 mm Offset, 29 = 44 mm Offset
|
| Shock |
FOX Float X Performance, Sealed Bearing Eyelet, 25x8 mm F Hardware, SM = 210x55 mm, MD - LG - XL = 230x60 mm
|
| Shifting |
Shimano SLX 1x12
|
| Derailleur |
Shimano XT
|
| Cassette |
Shimano Deore 10-51T 12 speed
|
| Crankset |
Race Face Aeffect Cinch, 32T, 24 mm Spindle, 170 mm Crank Length
|
| Brakes |
Shimano SLX Trail 4 Piston, Metal Pads, Shimano RT64 203/180 mm
|
| Wheels |
WTB ST i30 TCS 2.0 Tubeless, 32H, Tubeless Ready / Rocky Mountain Sealed Boost 15 mm/Shimano XT Boost 148 mm
|
| Tires |
Maxxis Assegai 2.5 WT 3C MaxxGrip EXO+ Tubeless Ready/Maxxis Minion DHR II 2.4 WT 3C MaxxTerra EXO+ Tubeless Ready
|
| Seat post |
Race Face Aeffect R Dropper 30.9 mm, Shimano MT500 Remote, SM = 125 mm, MD = 150 mm, LG - XL = 175 mm
|
| Saddle |
WTB Volt Race 142
|
| Stem |
Rocky Mountain 35 AM, 5° Rise, 40 mm
|
| Sex | Men |
| Model year | 2024 |
| Gears | 1x12 |
| Groupset | Shimano XT, Shimano SLX, Shimano Deore |
| Colour | gray/pink |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 170 mm |
| Rear travel | 160 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 357328 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 157 - 167 cm | 165 - 175 cm | 173 - 183 cm | > 183 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
There are currently no reviews