Mondraker Dune, model 2020
-13% GHOST Kato FS Essential 27.5 bicycle, black/green matt
1,869 €
-13%
RRP 2,149 €
New model Rock Machine Whizz FS II 50 29/27.5 bike, matte deep ocean blue
2,949 €
RRP 3,099 €
Fork: RockShox Yari RC Motion control 27´5, 170mm, DebonAir, tapered steerer tube, 15x110mm axle, offset 37mm. Settings: low-speed compression to lock, rebound, air preload
Muffler: Fox Float DPX2 LV EVOL Performance, 205x65mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 22.2x10mm bottom bushings
Head composition: Onoff Saturn tapered for 1-1 / 8 ”to 1-1 / 2” head tube, ACB sealed bearings, top 41x30.2x7x45 ° x45 °, bottom 51.9x40x8x45 ° x45 °
Stem: Onoff Sulfur FG 30mm 0 °, 6061 forged alloy, 31.8 mm barbore
Handlebars: OnOff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 780mm, 9 ° backsweep, 5 ° upsweep, 31.8mm barbore
Grips: Onoff Twin, 1lock-on, 135mm
Seatpost : Onoff Pija dropper internal, diameter 31.6mm, S size: 337x100mm, M size 387x125mm, L / XL size: 425x150mm
Saddle: SDG Fly MTN, PU foam, steel rail, Cordura sides
Front brake: Shimano MT520, RT66 203mm IS 6 bolts rotor, resin pads
Rear brake: Shimano MT520, RT66 180mm IS 6 bolts rotor, resin pads
Brake levers: Shimano MT501, servo wave, alloy lever
Rims: MDK-EP1 27´5 TLR ASY, asymmetrical rim, 30mm internal width, tubeless ready, 32 spokes
Tip: CN round stainless steel
Front hub: MDK DC711 15x110mm, sealed bearings, IS 6 bolts
Rear hub: MDK DHT 12x148mm, sealed bearings, IS 6 bolts
Front tire: Maxxis Minion DHF 27´5x2.5 WT, Tubeless ready, Dual compound, EXO protection, 60TPI, folding bead
Rear tire: Maxxis Minion DHR II 27´5x2.4 WT, Tubeless ready, Dual compound, EXO protection, 60TPI, folding bead
Cranks: SRAM SX Eagle 12s, Boost, DUB axle, Direct Mount chain ring, S / M size: 170mm, L / XL size: 175mm
Converters: 32T, steel, X-Sync
Middle composition: Sram OAK BSA, sealed bearings, 73mm
Chain: SRAM SX Eagle, 12p
Gearbox: SRAM SX, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1: 1
Gearing : SRAMTrigger SX, 12s, X-Actuation 1: 1
Cassette: SRAM PG-1210 Eagle, 11-50T, 12p
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
27.5” wheels
Universal size for a wide range of bicycles. The advantage is better cross-country ability, higher traction and comfort, and still good dexterity. Slightly heavier.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | SRAM SX |
| Material | aluminium |
| Brakes | Hydraulic disc brakes |
| product ID | 106665 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Sale -23% POC Joint VPD Air elbow protectors, uranium black
from 58.99 €
-23%
RRP 95.99 €
Sale -30% Leatt MTB HydraDri 4.0 MTB waterproof jacket, black
from 118 €
-30%
RRP 199 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews