Lapierre Zest AM 5.0 ULTIMATE, model 2019
Year: 2019
Wheel size: 27" / 29"
Frame: NEW Zest AM FIT FULL CARBON ULTIMATE 150 mm (27.5"), 140 mm (29") travel PRESSFIT, BOOST, METRIC, THRU AXLE
Fork: NEW RockShox REVELATION RC MOTION CONTROL BOOST 150 mm (27.5"), 140 mm (29")
Derailleur: SRAM GX EAGLE 12 spd
Cranks: NEW SRAM X01 CARBON EAGLE BOOST 148 OAK 12 spd, 32T (S /27.5" ), 34T (M / 27.5" ), 32T (M, L, XL / 29" )
Center composition: NEW DUB PRESSFIT MTB 92
Cassette: NEW SRAM PG1230 EAGLE 11-50 12spd
Chain: NEW SRAM NX EAGLE 12SPD
Brakes: SRAM GUIDE R
Shifting: NEW SRAM NX EAGLE Matchmaker 12SPD
Head composition: FSA ORBIT ZERO STACK + ANGLESET 0.5 °
Handlebars: LP 6061DB 760 mm (S, M), 780 (L, XL), 15 mm RISE, 31.8 BAR BORE
Grips: LP LOCK-ON
Stem: NEW LP FULL CNC 0 ° 35 mm (S, M, L), 45 mm (XL)
Seatpost : LP DROPPER 100 (S), 125 (M ), 150 (L, XL)
Saddle: NEW Lapierre CrMo by VELO
Front hub: Lapierre by FORMULA DC-7131 TORQUE CAPS, BOOST 15x110, 32H
Rear hub: Lapierre by FORMULA LA-148S, 4 SEALED BEARINGS, BOOST 12x148, 32H
Rims: LP AM READY 30 FRONT, READY 27 REAR, FRT: 27.5x30c (S, M), 29x30 cm (M, L, XL), RR: 27.5x27c (S, M), 29x27c (M, L, XL) TUBELESS READY 32H (1)
Tyres: MAXXIS HIGH ROLLER II WIDE TRAIL 27.5x2.4 (S, M), 29x2. 5 (M, L, XL) FRONT, MAXXIS HR II 27.5x2.4 (S, M), minion DHR 29x2.4 WT (M, L, XL)
Pedals: NW 91K
Discs: SRAM CENTERLINE Rounded 180/180 (27.5"), 200/180 (29")
Shock absorber: NEW RockShox DELUXE RT TRUNNION
Front travel: 150 mm (27.5"), 140 mm (29")
Model year | 2019 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM GX, SRAM NX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 64265 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews