Kellys Eraser 90 orange, model 2016
frame size S / M / L
fork ROCK SHOX Pike RC (27.5), 160mm, Dual Position Air / Charger Damper / Maxle Ultimate 15mm thru axle
rear silencer FOX Float X Performance, air / 3-Position Lever: Open-Medium-Firm (216x63mm)
main composition FSA 1.5 integrated
medium composition SRAM PressFit
cranks SRAM GX-1000 X-Sync (32) - length 170mm
SRAM GX 11-Speed X-Actuation Trigger (rear)
SRAM X1 11-Speed X-Horizon converter
number of transfers 11
cassette pinion SRAM XG-1150-11 (10-42)
chain KMC X11 (112 links)
brakes SRAM Guide R Hydraulic Disc (4-piston)
brake discs front 180mm / rear 180mm
brake levers SRAM Guide R
fixed axle ROCK SHOX Maxle Ultimate - front 15x100mm / rear 12x142mm
twisted wheels DT Swiss E1700 SplineTwo XD (27.5)
tires front SCHWALBE Hans Dampf Performance 60-584 (27.5x2.35) folding / rear SCHWALBE Nobby Nick Performance 57-584 (27.5x2.35) folding
stem RACE FACE Atlas - diam 28.6mm / bar bore 35mm / 0 ° / length 50mm
handlebars RACE FACE Atlas RiseBar - diam 35mm / width 800mm
handles RACE FACE Half Nelson
seatpost KS - LEV Integra - Remote Telescopic - diam 31.6mm / length 385mm / stroke 125mm
saddle KLS Havoc
pedals KLS Master - alloy
Model year | 2016 |
Gears | 1x11 |
Groupset | SRAM X1, SRAM GX |
product ID | 69929 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews