Kellys Eraser 70 S, model 2018
frame size: S / M / L
fork: ROCK SHOX Pike RC (27.5) Boost, 160mm, Solo Air / Charger Damper / Maxle Stealth 15mm thru axle
rear silencer: ROCK SHOX Monarch Plus RC3, Solo Air / Rapid Recovery / Open-Pedal-Lock (216x63mm)
main composition: FSA 1.5 integrated
medium composition : SRAM PressFit
cranks: SRAM NX 1x X-Sync (30) - length 175mm
gear: SRAM NX 11-Speed X-Actuation Trigger (rear)
derailleur: SRAM NX 1x11 X-Horizon
number of transfers: 11
cassette: SRAM XG-1150-11 (10-42)
chain: KMC X11 (112 articles)
brakes: SRAM Guide R Hydraulic Disc (4-piston)
brake discs: front 180mm / rear 180mm
brake levers: SRAM Guide R
hubs: NOVATEC Disc XD (15x110mm / 12x142mm / (32 holes)
fixed axle: ROCK SHOX Maxle Stealth - front 15x110mm / NOVATEC rear 12x142mm
rims: KLS Valor Disc 584x23 (32 holes)
string: stainless steel black
tires: SCHWALBE Nobby Nic Performance 60-584 (27.5x2.35) folding
stem : RACE FACE Respond - diam 28.6mm / bar bore 31.8mm / 10 ° / length 45mm
handlebars: RACE FACE Respond RiseBar - diam 31.8mm / width 785mm
handles: KLS Crypton - LockOn One
seatpost: RACE FACE Affect - Remote Telescopic - diam 31.6mm / length 385mm / stroke 125mm
saddle: KLS Styx
pedals: KLS Master - alloy
Model year | 2018 |
Gears | 1x11 |
Groupset | SRAM NX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 123140 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews