Giant Reign Advanced Pro 29 1, model 2020
Frame: Advanced Composite, all-carbon (including rear construction), Maestro suspension, stroke 146 mm
Fork: FOX 36 Float, stroke 160 mm, GRIP2 damping, Boost axis 110x15 (cable), 42 mm offset
Muffler: FOX Float X2
Handlebars: Giant Contact SL TR 35, 800x35 mm, 20 mm increase
Stem: Giant Contact SL 35
Seatpost: Giant Contact Switch, telescopic, 30.9 mm
Saddle: Giant Contact SL (Neutral)
Pedals: -
Gearing: SRAM GX Eagle, gears 1x12
Derailleur: -
Derailleur: SRAM GX Eagle
Brakes: SRAM Code R
Brake levers: SRAM Code R
Cassette: SRAM Eagle, 10-50 teeth
Chain: SRAM GX Eagle
Cranks: Truvativ Descendant 6k Eagle DUB, 32-tooth converter, MRP AMG V2 alloy chain guide
Middle composition: SRAM OAK, press fit
Rims: Giant TR-1 29 WheelSystem, aluminum rims, 30 mm inner width
Hubs: Giant TR-1 29 WheelSystem, Fixed axle Boost 110x15 and 148x12 mm
Wires: Giant TR-1 29 WheelSystem
Tires : front Maxxis Minion DHF 3C MaxxTerra EXO + TR, 29x2.5 WT / rear Maxxis Minion DHR II 3C MaxxTerra EXO + TR, 29x 2.4 WT (tubeless)
Accessories: preparation for tubeless operation
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM GX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 109740 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews