Giant Anthem 3 GE, model 2018
AluxX SL Aluminum frame, Maestro suspension, stroke 90 mm, carbon upper rocker arm
RockShox Recon RL fork, stroke 100 mm, Solo Air, fixed axle Boost 15x110 mm, OverDrive post
RockShox Deluxe RT silencer, Trunnion Mount
Giant Contact Trail handlebars, 780 x 31.8 mm
Giant Contact stem
Seatpost Giant Contact, 27.2 mm
Saddle Giant Contact (Forward)
Shimano Deore, 2x10
Shimano Deore derailleur
Shimano Deore Shadow + derailleur
Shimano MT500 brakes, 180/160 mm discs
Brake levers Shimano MT500 I-Spec II
Shimano HG50 cassette, 11-42T
KMC X10 chain
Shimano Deore M6000 cranks, converters 36/26
Central composition of Shimano PressFit
Giant XC-1 29 Wheelset rims, Tubeless Ready, 21 mm inner rim width
Giant Tracker Boost hubs, encapsulated bearings, fixed axle 15x110 / 12x148 mm
SAPI wires
Tires Maxxis IKON 29 x 2.2, Folding, 60 TPI, Tubeless Ready, EXO Protection
Model year | 2018 |
Gears | 2x10 |
Groupset | Shimano Deore |
product ID | 76180 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews