Ghost Slamr 9.9 LC RED / BLACK, model 2018
Material: LC carbon
Wheel size: 29
Fork: Rock Shox Pike RCT3 Debon Air 130mm
Muffler: Rock Shox Deluxe RT3 Air 130mm
Derailleur: SRAM X01 Eagle 12-S
Converter: Truvativ Descendant Eagle X-Sync 32
Brakes: Magura MT Fifty4 4/2 Piston 180mm Disc
Front tire: Maxxis Minion DHR II 3C MaxxTerra Exo 29x2.3
Rear tire: Maxxis Minion SS Exo 29x2.3
Wheels: Synthesis M 28mm Wheelset 15x110mm, 12x148mm SRAM XD
Front hub: 15x110mm
Rear hub: 12x148mm
Frame: SLAMR LC
Gear: SRAM GX Eagle
Cranks: Truvativ Descendant Carbon Eagle X-Sync 32z
Cassette: SRAM XG 1275 10-50
Handlebars: Syntace Vector 780mm, rise 20mm, 31.8mm
Stem: Megaforce 2 Syntax, 31.8mm
Seatpost: Kind Shock LEV Integra 31.6mm
Saddle: SDG Fly Mountain
Number of speeds: 12
Front stroke: 130mm
Rear stroke: 130mm
Heel: FRHG0057
Model year | 2018 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM GX |
Material | carbon fiber |
product ID | 43778 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews