GHOST Riot AM Essential 29 bike, blue/ocean blue
Ghost Riot AM Essential 29 bike
Perfectly balanced aluminum frame in one-piece construction with a low center of gravity. The Traction Link® rear shock absorber brings control and the necessary stiffness in downhill passages and does not restrict the rider even in the climb. An upright seatpost, a drop-back fork and longer rear stays are the main features of the state-of-the-art geometry, which is based on the SUPERFIT® algorithm developed by GHOST. This will determine the optimal length of each frame tube depending on the height of the rider. There are 3 ride levels and a total of 7 mounting levels.Frame |
RIOT AL
|
Fork |
Fox 36 Float Rhythm 160 mm
|
Shock |
Fox Float X Performance 150 mm
|
Shifting |
Shimano SLX SL-M7100
|
Derailleur |
Shimano XT RD-M8100, 12-speed
|
Cassette |
Shimano Deore CS-M6100, 10-51T
|
Chain |
Shimano DEORE CN-M6100
|
Cranks |
Shimano SLX FC-M7100, 32T
|
Brakes |
Shimano BR-MT520 203 mm Disc / Shimano SM-RT64 203 mm
|
Brake levers |
Shimano BL-MT501
|
Rims |
WTB ST i30 / WTB ST i30
|
Hubs |
Shimano HB-MT400-B 15x110 mm / Shimano FH-MT510-B 12x148 mm
|
Tires |
front: Maxxis Minion DHF 3C MaxxTerra Exo 2.3
rear: Maxxis Aggressor Exo 2.3 |
Seat post |
Limotec Alpha 1 34.9 mm 125 (S) 150 (M) 170 (L/XL)
|
Saddle |
WTB Volt
|
Stem |
Ground Fiftyone, Ø 31.8 mm
|
Handlebars |
Ground Fiftyone, Ø 31.8 mm, 760 mm/15 (S), 780 mm/15 (ML), 780 mm/40 (XL)
|
Grips |
WTB Wafel
|
Headset |
Acros AZX-203
|
Bottom bracket |
Shimano BB-MT800
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Colour | blue/ocean blue |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 150 mm |
product ID | 141520 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews