Ghost Riot 8.7 UC BLACK / YELLOW / TAN, model 2018
Material: Ultralight UC carbon
Wheel size: 27.5
Fork: Cane Creek Helm 150mm
Damper: Cane Creek Inline Coil CS 130mm
Derailleur: SRAM X01 Eagle 12-S
Converter: Truvativ Descendant Carbon Eagle X-Sync 34
Brakes: SRAM Guide RSC 4/4 Piston 200/180mm Disc
Front tire: Maxxis Minion DHR II 3C MaxxTerra Exo 27.5x2.3
Rear tire: Maxxis Minion SS Exo 27.5x2.3
Wheels: Syntace M Wheelset 28mm 15x110mm, 12x148mm SRAM XD
Frame: RIOT UC
Shifting: SRAM GX Eagle
Cranks: Truvativ Descendant Carbon Eagle X-Sync 34z
Cassette: SRAM XG 1295 10-50
Handlebars: Syntace Vector 780mm, Rise 20mm, 31.8mm
Stem: Syntace Megaforce 2, 31.8mm
Seatpost: Rock Shox Reverb Stealth 31.6mm
Saddle: SDG Fly Mountain
Number of speeds: 12
Front lift: 150mm
Rear lift: 130mm
Foot: FRHG0057
Model year | 2018 |
Groupset | SRAM X01, SRAM GX |
product ID | 43767 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews