Ghost FRAMR 6.7 Jet Black / Urban Gray, model 2020
Material: Aluminum
Frame: FRAMR AL
Fork: Formula Selva S 170 mm
Derailleur: SRAM GX Eagle 12-S
Cranks: Truvativ Descendant 6K Eagle X -Sync 34T
Center composition: SRAM DUB Pressfit
Cassette: SRAM XG 1275 10-50
Chain: SRAM SX Eagle
Brakes: SRAM Code R 4/4 Piston 200 mm Disc
Handlebars: Ground Fiftyone Riser Bar 780 mm Rise 25 mm dia. 31.8 mm
Grips: Production Privee
Stem: Ground Fiftyone Dia. 31.8 mm
Saddle: Ergon SMD2 Comp
Discs: SRAM Centerline 200 mm
Damper: Fox DHX2 Coil Performance Elite 165 mm
Front stroke: 170 mm
Rear stroke: 165 mm
Friday : FRHG0057
Front tire: Maxxis Minion DHF 3C MaxxTerra Exo + 27.5x2.5
Rear tire: Maxxis Minion DHR II MaxxTerra Exo + 27.5x2.4
Modified color variant - according to the B2B model: Jet Black / Urban Gray
Number of gears: 12
Chain guide: e * thirteen TRS ISCG05 34T
Front braided wheels: Syntace V30 15x110 mm
Rear braided wheels: Syntace V30 12x148 mm
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM GX, SRAM SX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 88112 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews