Corratec Revolution iLink LTD
Fork: Rockshox REBA RL +
Zadný tlmič: Fox 2019 FLOAT DPS Factory Suspension travel: 120mmDPS Dual Piston System enables the rider to choose between three different pressure levels and ensures always the correct response for the different surfaces EVOL Extra Volume for maximum comfort and more feeling on the trails
Brakes: Shimano Disc Brake MT400
Stem: ZZYZX SL Alloy Length: 50mmMaterial: Alloy
Handlebars: ZZYZX SL Alloy Width: 760mmMaterial: Alloy
Seat: Selle Italia X3
Seatpost: Kindshock E20i OD Outer diameter: 31.6mmMaterial: Alloy
Converter: SRAM NX Eagle
Cassette: SRAM PG1230 Eagle Number of pinions; Ratio: 12s; 11-13-15-17-19-22-25-28-32-36-42-50
Derailleur: SRAM NX Eagle Material: Alloy
Gearing: SRAM NX Eagle Trigger Shifter Material: Alloy
Rims: ZZYZX Cross Attack 29 Boost Material: Alloy
Tires: Schwalbe Nobby NicInside diameter: 29.00zollWidth: 60mmType of tires: clincher, Tubeless ready
Converter gears: 1s; 32
Cassette gears: 12s; 11-13-15-17-19-22-25-28-32-36-42-50
Fork stroke: 120 mm
Stroke of the rear shock absorber: 120 mm
Brake Disc Size: 180 mm front160 mm rear
Gears | 1x12 |
Groupset | SRAM NX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 84424 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews