Corratec Inside Link 10Hz From 2015, mountain bike
Mountain, fully sprung bike with 10Hz technology, on 27.5 "wheels.
Corratec InsideLink 10Hz
Frame: Inside Link 10Hz. 120mm plus 10Hz. 142
Fork: Man 'Minute Comp 650b. Taper.15QR.130mm
Rear silencer: Manitou Radium Expert. 200 x 57
Gear: Shimano DEORE M610 Spec
Shimano SLX M675. SGS 10S, SHADOW PLUS
Derailleur: Shimano DEORE M616, TOP-PULL, DM, 38 / 44T
Brakes: Shimano M506. 180/160
Cranks: Shimano FC-M625, 175MM, 38X24T
Center: Shimano SM-BB71-41A PRESS FIT
Chain: Shimano HG54
Cassette: CS-HG50-10, 10S 11-36T
Wheels: ZZYZX Cross Attack. 32H. 142 / 15QR
Tires: Conti X King 650b x 2.2
Stem: ZZYZX 6 Series 3D. 31.8. 6 degree
Handlebars: ZZYZX 6 Series 740mm. 15mm. 9/5 degree
Seat: Corratec MTB Custom
Seatpost: ZZYZX Twin Bolt Alloy. 31.6 x 350
Model year | 2015 |
Gears | 2x10 |
Groupset | Shimano SLX, Shimano Deore |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 16238 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews