Cannondale Jekyll 29 Carbon 2 2020 CAS SAMPLE, size M
Fork: Fox Float Performance 36, 150mm, Grip2 Damper, 3-Pos adj., 15x110, tapered steerer, 42mm offset
Silencer: Fox Float Factory DPX2 EVOL w / Gemini dual mode air spring system (Flow Mode - 150mm / Hustle Mode - 120mm, Remote Activated) 3-Pos adj.
Cranks: Truvativ Stylo 7K OAK, 30T, Ai offset
Control levers: SRAM GX Eagle, 12-speed
Cassette: SRAM XG-1275, GX Eagle, 10-50, 12-speed
Chain: SRAM GX Eagle, 12-speed
Derailleur: SRAM X01 Eagle
Hubs: Formula 15x110SRAM 900 12x148 w / XD driver
Brakes: SRAM Code R hydro disc, 200 / 180mm Centerline rotors
Stem: Cannondale 1, 3D Forged 6061 Alloy, 1-1 / 8 ", 31.8, 0 °
Head composition: Integrated, 1-1 / 8 to 1.5 ", sealed angular contact bearings
Handlebars: Cannondale 3 Riser, 6061 Alloy, 15mm rise, 8 ° sweep, 4 ° rise, 780mm
Brake levers: SRAM Code R hydro disc
Wires: DT Swiss Champion
Tires: Maxxis Assegai, 29 x 2.5 ", 3C Compound, Max EXO puncture protection, tubeless ready
Saddle: Fabric Scoop Shallow Elite, cro-mo rails
Seatpost: Cannondale DownLow Dropper, internal routing, 31.6, 125mm (S), 150mm (M-XL)
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM GX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 111827 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews