Orbea MX 29 30, model 2020
Bike fitting discount 20 % (you will save 28 €)
XC category solid aluminum mountain bike
Frame - Orbea MX Alu only disc
Fork - SR Suntour XCM RL-Coil 100mm QR
Cranks - Alloy forged 26x36t 10S
Head assembly - 1-1 / 8 ”Semi-Integrated
Handlebars - Alloy Flat 31.8mm 720mm
Stem - Alloy 31.8mm interface 7º
Gear levers - Shimano Deore M6000
Brakes - Shimano M315 Hydraulic Disc
Derailleur - Shimano Deore M6000 GS Shadow Plus Direct Mount
Derailleur - Shimano Deore M6025 31.8mm
Chain - KMC X10
Twisted Wheels - Orbea Black Rock 23c Disc
Cassette - Sun Race 11-42t 10-Speed
Tires - Kenda K1153 2.35 ”30TPI
Pedals - VP-537 Black
Seatpost - Alloy 27.2 Offset 0
Saddle - Selle Royal 2062 DRN
| Model year | 2020 |
| Gears | 2x10 |
| Groupset | Shimano Deore |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 96486 |
Road
| Size | 47 | 49 | 51 | 53 | 55 | 57 | 60 |
|---|---|---|---|---|---|---|---|
| Rider height (cm) | 155 - 160 | 160 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
| Size | XS | S | M | L | XL | XXL |
|---|---|---|---|---|---|---|
| Rider height (cm) | 155 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
| Size | S | M | L | XL |
|---|---|---|---|---|
| Rider height (cm) | 155 - 170 | 165 - 180 | 179 - 190 | 185 - 198 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 150 - 160 | 160 - 170 | 170 - 180 | 180 - 190 | 190 - 200 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
má to aj zámok pruženia vydlice na riaditkách?
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews