Mongoose Tyax 29 Expert, model 2020
Bike fitting discount 20 % (you will save 28 €)
Fork: SR Suntour XCR Air, 29 ”, aluminum steerer, hydraulic lockout, 9 mm x 100 mm, QR, 100 mm travel
Cranks: SRAM SX Powerspline, aluminum, 30T
Middle composition: SRAM, BC-73 cartridge, 3-piece, threaded 73 mm shell
Derailleur: SRAM SX Eagle
Cassette: SRAM PG-1210, 12-speed, 11-50T
Chain: SRAM SX 12spd
Gearing: SRAM SX Eagle, 12-speed
Brakes: Shimano BR-M400, hydraulic, aluminum, 160 mm rotor
Rims: WTB ST-i29, aluminum double wall, 29 mm ID, 32H, tubeless compatible
Front hub: Shimano HB-MT200B, aluminum, ball bearing, 9 mm x 100 mm, 32H, Center Lock
Rear hub: Shimano FH-MT200B, aluminum, ball bearing, 9 mm x 141 mm QR, 32H, Center Lock
Spikes: Stainless Steel, 14g
Tires : Kenda Kadre, 29 in x 2.20 in, wire bead
Handlebars: Xposure, double-butted aluminum, 740 mm width, 15 mm rise, 31.8 mm clamp
Stem: Cannondale 3, 6061 alloy, 31.8, 7 °
Head composition: Xposure 3D forged aluminum, threadless, 60 mm / 70 mm, 6 °, 31.8 mm clamp
Saddle: Mongoose MTB, steel rails
Seatpost : Xposure, aluminum, 350 mm, zero offset, 31.6 mm
Pedals: Mongoose, nylon
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | SRAM SX |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 101512 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Dobrý deň aká je prosím vás váha bicykla?
A ešte dá sa vidlica uzamknut aj z riaditok? Ďakujem
Dobrý deň,
váhu výrobca nikde neuvádza a bohužiaľ ho pre Vás nevieme odvážiť, pretože ho nemáme na predajni. Zamkýnanie vidly je priamo na korunke, nie na riadidlách.
Aky to ma uhol HZ a sedlovej trubky ? Dakujem
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews