Mongoose Tyax 29 Comp, model 2020, orange
Bike fitting discount 20 % (you will save 28 €)
Fork: SR Suntour XCM, 29 ", steel steerer, hydraulic lockout, 9 mm x 100 mm, QR, 100 mm travel
Cranks: Prowheel Charm, aluminum, 30T
Gear: Shimano SLX SL-M7000
Cassette: Sunrace, 11-speed, 11-50T
Chain: KMC X11
Shimano SLX RD- M7000
Rims: WTB ST-i29, aluminum double wall, 29 mm ID, 32H, tubeless compatible
Hubs: Xposure, aluminum, ball bearing, 9 mm x 100 mm, 32H, 6-boltXposure, aluminum, ball bearing, 9 mm x 141 mm QR, 32H, 6-bolt
Pedals: Mongoose, nylon
Brakes: Tektro HD-M290, hydraulic, aluminum, 160 mm rotor
Stem: Xposure 3D forged aluminum, threadless, 60 mm / 70 mm, 6 °, 31.8 mm clamp
Head composition: Threadless, ZS44 / ZS56, retainer bearing
Handlebars: Xposure, double-butted aluminum, 740 mm width, 15 mm rise, 31.8 mm clamp
Tip: 14G, stainless steel
Tires : Kenda Kadre, 29 in x 2.20 in, wire bead
Saddle: Mongoose MTB, steel rails
Seatpost : Xposure, aluminum, 350 mm, zero offset, 31.6 mmbsp;
| Model year | 2020 |
| Gears | 1x11 |
| Groupset | Shimano SLX |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 101453 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Dobrý deň, rád by som sa informoval či je možné tento bicykel zložiť vo veľkosti XL. Nakoľko mám výšku 195cm a prevedenie L by už bol pre mňa malá velkosť. Ďakujem za odpoveď.
Dobrý deň,
preverím u dodávateľa a dám Vám vedieť.
Dobrý deň,
bohužiaľ dodávateľ nevie termín ďalšieho naskladnenia.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews