Mondraker mountain bike Chrono Carbon RR 29, carbon / light blue / flame red, 2020
fork: Fox 32 Step Cast Float 29 Remote Grip Evol Performance Boost, travel 100mm
head composition: ONOFF Titan tapered Internal
derailleur: Sram GX Eagle X -Horizon Type3 1x12 speed
shifting: Sram NX Eagle Trigger right 12 speed
brake levers: Shimano M501
cranks and chainrings: Truvativ Stylo 6K Eagle DUB Boost DM, 34 teeth
center composition: Sram DUB PF30 73mm
handlebars: ONOFF Sulfur 0.2, width 740mm
stem : Mondraker XC, slope 5 °
seatpost: ONOFF Sulfur 0-R, diameter 27.2, length 400mm
saddle: Mondraker XC Series
front hub: Mavic Boost, axle 15x110mm
rear hub: Mavic Boost, axle 12x148mm
chain: Sram NX Eagle
cassette: Sram Eagle XG1230 11-50 teeth, 12 speeds
wires: Mavic
rims: Mavic Crossmax Tubeless Boost, braided set
tires: Maxxis Ikon 3C MAXX Speed TR 29, width 2.20
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM GX, SRAM NX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 97615 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews