Marin Wildcat Trail 3 WFG 27.5 women's bike, black/gray/silver
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 20 % (you will save 28 €)
MARIN Wildcat Trail 3 WFG 27.5" women's bike, black/grey/silver
| Frame |
Series 2 6061 Aluminium, Women's Specific Frame, 27.5" Wheels, Low Standover, 68 mm BB shell, 135 mm Forged Dropouts, IS Chainstay Disc Mount, Internal Housing Routing
|
| Fork |
SR Suntour XCM HLO, 120 mm Travel, Hydraulic Lockout, 46 mm Offset
|
| Front derailleur |
Altus Double
|
| Rear derailleur |
Shimano Altus, 8-Speed
|
| Cassette |
SunRace 8-Speed, 11-34T
|
| Chain |
KMC Z8
|
| Crankset |
Alloy Crank, Steel Chainrings, 36/22T
|
| Front brake |
Tektro M275 Hydraulic Disc, 160 mm Rotor
|
| Rear brake |
Tektro M275 Hydraulic Disc, 160 mm Rotor
|
| Brake levers |
Tektro M275 Hydraulic Disc
|
| Rims |
Marin Aluminium Double Wall, 25 mm Inner, Pinned Joint, Disc Specific
|
| Front hub |
Forged Alloy, Disc, 32H
|
| Rear hub |
Forged Alloy, Disc, 32H
|
| Spokes |
Black Stainless Steel
|
| Tires |
MTB, 27.5x2.25"
|
| Seat post |
Marin Alloy, 30.9
|
| Saddle |
Marin MTB
|
| Stem |
Marin Alloy, 31.8 mm Clamp, 45 mm
|
| Handlebars |
Marin 31.8 Riser, 12 mm Rise, 740 mm Width
|
| Grips |
Marin MTB, Closed End
|
| Headset |
FSA No.10-P
|
| Bottom bracket |
Sealed Cartridge Bearings, Square Taper
|
| Pedals |
Nylon Platform
|
| Shift levers |
Shimano Altus SL-M315, 8-Speed
|
| Sex | Women |
| Model year | 2022 |
| Gears | 2x8 |
| Groupset | Shimano Altus |
| Size | XS, S, M, L |
| Colour | black/grey/silver |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 27.5 |
| Brakes | Hydraulic disc brakes |
| Fork | Spring |
| Fork travel | 120 mm |
| Dropper post | no |
| Control type | mechanical |
| product ID | 144982 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
