Marin Bobcat Trail 26 bicycle, black
Bike fitting discount 20 % (you will save 28 €)
Marin Bobcat Trail 26 bike
| Frame |
6061 Aluminum, Double Butted Hydro-Edge II Top and Down Tubes, E4 Anti-Flex Seat and Chain Stays
|
| Fork |
Suntour XCR-RL, 100 mm Travel
|
| Shifting |
Shimano Acera Rapid Fire Plus, 9 Speed
|
| Derailleur |
Shimano Deore, 9-Speed
|
| Cassette |
SRAM PG-950, 9-Speed, 11-34
|
| Chain |
Shimano HG53
|
| Crankset |
TruVativ E400 3.0, 44/32/22, 9 Speed
|
| Front brakes |
Tektro Draco Hydraulic Disc
|
| Rear brakes |
Tektro Draco Hydraulic Disc
|
| Brake levers |
Tektro Draco Hydraulic
|
| Rims |
WTB SX17, Double Wall, 32 Hole Disc
|
| Front hub |
Alloy Double Sealed, 32 Hole Disc
|
| Rear hub |
Alloy Double Sealed, 32 Hole Disc with QR
|
| Spokes |
15 Gauge Black Stainless
|
| Tires |
Continental X-King, 26" x 2.2"
|
| Seat post |
Alloy 2-Bolt Micro Adjust, 30.9 mm
|
| Saddle |
WTB Silverado Sport
|
| Stem |
Marin OS Alloy Threadless with 31.8 mm Bar Clamp
|
| Handlebars |
Double Butted 6061 Alloy, OS-31.8 mm, 25.4 mm Rise
|
| Grips |
Marin Dual Density
|
| Headset |
FSA No.10, 1 1/8”, Threadless Internal Bearing
|
| Pedals |
Composite
|
| Derailleur |
Shimano Acera, 9-Speed
|
| Bottom bracket |
TruVativ with Sealed Cartridge
|
| Model year | 2012 |
| Gears | 3x9 |
| Groupset | Other |
| Size | 20.5", 22" |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 26" |
| Brakes | Hydraulic disc brakes |
| Fork | Spring |
| Fork travel | 100 mm |
| product ID | 147805 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews