Lapierre ProRace CF 7.9 29 bike, green
Lapierre ProRace SAT CF 7.9 29 bike
LAPIERRE ProRace SAT CF 7.9 is a modern carbon hardtail with geometry adapted to technical single trails as well as cross-country and marathon races. However, the carbon frame is not the only novelty of this year's ProRace line. Thanks to the 3D Tubular concept, you dissipate the vibrations between the seat and the handlebars, for greater comfort the seat tube is not directly connected to the seat stay and the frame has fully integrated cabling. Another advantage of this model is the SAT technology. It is an inserted elastomer between the main frame triangle and the rear struts.Especially suitable for sports enthusiasts who like to spend time on wheels after work or over the weekend. Suitable for regular riding, from cycle paths, fields and forest roads to moderately demanding terrain. Usually fitted with components that are the golden middle when it comes to reliability and durability.
Frame |
New Prorace 29" carbon, pressfit, boost, thru axle 12x148 mm
|
Fork |
Fox 32 Float SC PERF 15 mm 100 mm boost + remote
|
Shifting |
SRAM GX Eagle 12s
|
Cassette |
SRAM PG1230 Eagle 11-50T 12s
|
Chain |
SRAM GX Eagle 12s
|
Cranks |
SRAM GX Eagle DUB 32T Chainline 55 mm 170 mm (S) / 175 mm (M, L, XL)
|
Brakes |
SRAM Level TL black with Stealth-a-majig
|
Front tire |
Maxxis Rekon Race EXO TR 29x2.35
|
Rear tire |
Maxxis Rekon Race EXO TR 29x2.35
|
Seat post |
Lapierre alloy forged, Ø: 27.2 mm, L: 400 mm
|
Saddle |
Fizik Taiga black
|
Stem |
Lapierre 7050 alloy, 7°, Ø: 31.8 mm, L: 60 mm (S, M), 70 mm (L, XL)
|
Handlebars |
Lapierre alloy 6061 Top flat, Width: 740 mm, Ø: 31.8 mm
|
Grips |
Lapierre foam grips small (S), large (M, L, XL)
|
Pedals |
NW 91K Steel cage
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x12 |
Groupset | SRAM GX |
Size | S, M, L, XL |
Colour | green |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 151077 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews