Kellys TNT 70, mountain bike, model 2017
Bike fitting discount 20 % (you will save 28 €)
frame size 430mm (17 ") / 480mm (19") / 530mm (21 ")
fork SR SUNTOUR XCR LO (29), 100mm, coil / Speed Lockout
main composition KLS Expert semi-integrated
medium cartridge composition ( 113mm )
KLS Race cranks (40x30x22) - length 170mm (17 ") / 175mm (19" - 21 ")
SHIMANO Alivio SL-M4000 Rapidfire Plus
derailleur SHIMANO Acera M3000 (diam 34.9mm)
SHIMANO Alivio M4000 converter (direct mount)
number of transfers 27
cassette pinion SHIMANO CS-HG300-9 (11-34)
KMC X9 chain (112 links)
brakes SHIMANO M365 Hydraulic Disc
brake discs front 160mm / rear 160mm Center Lock
brake levers SHIMANO BL-M365
hubs SHIMANO TX505 Disc Center Lock (32 holes)
KLS Draft Disc 622x19 rims (32 holes)
string stainless steel black
tires SCHWALBE Rapid Rob 57-622 (29x2.25)
stem KLS Expert - diam 28.6mm / bar bore 31.8mm / 6 ° / length 70mm (17 "), 90mm (19" - 21 ")
KLS Expert RiseBar handlebars - diameter 31.8mm / width 660mm (17 "), 700mm (19"), 720mm (21 ")
KLS Advancer 2Density handles
seatpost KLS Expert - diam 30.9mm / length 350mm (17 "), 400mm (19" - 21 ")
saddle KLS Sentinel
pedals KLS Master - alloy
| Model year | 2017 |
| Gears | 3x9 |
| Groupset | Shimano Alivio, Shimano Acera |
| Material | aluminium |
| Control type | mechanical |
| product ID | 31138 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Dobrý den,chcem Vás poprosit o radu či bude pasovat táto pumpa na nafukanie vidly,dakujem za Vašu radu,pekný den prajem.https://www.mtbiker.sk/shop/servis-a-trening/pumpy/beto-pumpa-na-odpruzene-vidlice-sp-002ag.html
Dobrý deň,
Tento bicykel nemá vzduchovú vidlu takže pumpa nebude potrebná
Dakujem za radu,prajem Vám pekný den.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

We are satisfied with the bike, even though it has not been tested yet, but my husband likes it very much. We only have an older version of this type in our family, so it will definitely be perfect. We are already looking forward to spring. [email protected]
Automatically translated