Kellys Spider 30 29 bike, black
Bike fitting discount 20 % (you will save 28 €)
Kellys Spider 30 29 bike
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
| Frame |
KELLYS Alutec RRC 29 - Race Ready Concept
|
| Fork |
SR SUNTOUR XCE28 DS (29), 100 mm, coil spring
|
| Shifting |
SHIMANO ST-EF510-8 EZ-fire Plus
|
| Derailleur |
SHIMANO TX800 (direct mount)
|
| Front derailleur |
SHIMANO TY600 (34.9 mm)
|
| Chain |
KMC Z8 (110 links)
|
| Crankset |
SHIMANO TY301 (42x34x24T) - length 170 mm (S), 175 mm (M - XL)
|
| Brakes |
Mechanical Disc
|
| Brake levers |
SHIMANO ST-EF510 EZ-fire Plus
|
| Brake discs |
front 160 mm / rear 160 mm
|
| Rims |
KLS Draft Disc 622x21 (32 holes)
|
| Hubs |
KLS Firework Disc (32 holes)
|
| Spokes |
steel
|
| Tires |
IMPAC Ridgepac or WTB Nano 54-622 (29x2.10)
|
| Seat post |
KLS Active - diam 30.9 mm / length 350 mm (S), 400 mm (M - XL)
|
| Saddle |
KLS Sentinel 2
|
| Stem |
KLS Active - diam 28.6 mm / bar bore 31.8 mm / 8° / length 75 mm (S - M), 90 mm (L - XL)
|
| Handlebars |
KLS Active RiseBar - diam 31.8 mm / rise 18 mm / width 660 mm (S), 680 mm (M - XL)
|
| Grips |
KLS Advancer
|
| Headset |
semi-integrated
|
| Bottom bracket |
cartridge (122 mm)
|
| Pedals |
ALLOY
|
| Cassette pinion |
SHIMANO CS-HG200-8 (12-32T)
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 3x8 |
| Groupset | Shimano Tourney |
| Size | S, M, L, XL |
| Colour | black |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Mechanical disc brakes |
| Fork | Spring |
| Fork travel | 100 mm |
| Dropper post | no |
| Control type | mechanical |
| product ID | 224386 |
| Bike size | S | M | L |
|---|---|---|---|
| Height (cm) | < 170 cm | 170 - 185 cm | > 185 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
