Kellys Gate 90 29, model 2018
frame size S / M / L
fork ROCK SHOX Recon Gold RL (29), 100mm, Solo Air / OneLoc Remote Lockout / Maxle Lite 15mm thru axle
main composition FSA 1.5 integrated
middle composition SHIMANO SM- BB52
SHIMANO SLX M7000-11 -B2 Holowtech II (36x26) - length 170mm (S), 175mm (M - L)
SHIMANO SLX SL- M7000 I-spec B Rapidfire Plus
SHIMANO Deore XT M8020-D derailleur (direct mount)
SHIMANO Deore XT M8000 converter (direct mount)
number of transfers 22
cassette pinion SHIMANO CS-M7000-11 (11-42)
chain KMC X10EL (112 links)
brakes SHIMANO Deore MT500 Hydraulic Disc
SHIMANO brake discs front 180mm / rear 160mm
SHIMANO Deore BL-MT500 brake levers
fixed axle ROCK SHOX Maxle Lite - front 15x100mm / NOVATEC rear 12x148mm
tangled wheels MAVIC Crossride 29 (15x110mm Boost / 12x148mm Boost) wheelset
tires SCHWALBE Rapid Rob 57-622 (29x2.25)
stem KLS Advanced - diam 28.6mm / bar bore 31.8mm / 7 ° / length 70mm (S), 80mm (M), 90mm (L)
handlebars KLS Advanced FlatBar - diam 31.8mm / width 680mm (S), 700mm (M), 720mm (L)
handles KLS Crypton LockOn
seatpost KLS Advanced - diam 30.9mm / length 350mm (S), 400mm (M - L)
KLS Avenger saddle
pedals KLS Master - alloy
Model year | 2018 |
Gears | 2x11 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Material | aluminium |
product ID | 53873 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews