Haibike Seet 10 27.5 Deore 21 HB titanium/lava mat.
Fork: Suntour XCR Air RL-R Remote Lockout, air, travel: 100mm, aluminum stanchion 1 1/8" - 1 1/2" weakened, thru-axle
Shifting: Shimano Deore M6100, 12-speed
Control lever: Shimano Deore M6100, Trigger controller
Cranks: Shimano Deore M5101, 30 teeth
Cassette: Shimano HG6100, 10-51 teeth
Chain: KMC X12
Brake levers: Shimano MT200
Brake (front): Shimano MT200, 180mm, 2-piston disc brake
Brake (rear): Shimano MT200, 160mm, 2-piston disc brake
Front tire: Schwalbe Tough Tom, 57x584 or Schwalbe Tough Tom, 57-622
Rear tire: Schwalbe Rapid Rob, 57-584 or Schwalbe Rapid Rob, 57-622
Rim: XLC X-630 D-WALL, hollow rim, aluminum
Front hub: Shimano TX505
Rear hub: Shimano MT401
Tip: black 2.0mm / 2.0mm / 2.0mm, black
Handlebars: XLC Topflat 720mm
Grips: XLC MTB grips
Stem: XLC Alu, A-head
Headstock: WTB No.10 ED 1-1/8" SEMI INTEGRATED, aluminum
Saddle: XLC MTB
Seatpost : 31.6mm, aluminum
Pedals: Plastic, non-slip
Allowed total weight: 120kg
Wheel size: 27.5"
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano Deore |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 119162 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews