Ghost Kato X4.9 WHITE / BLACK / RED, model 2019
Wheel size: 29"
Frame: KATO AL
Fork: SR Suntour Raidon 34 XC LO-R Air 120 mm
Derailleur: Shimano SLX RD-M7000 Shadow Plus 11-S
Cranks: Race Face Aeffect 32T
Cassette: Sunrace MS8-E 11-46
Brakes: Tektro HD-M285 2/2 Piston 180 mm Disc
Shifting: Shimano SLX SL-M7000
Head composition: 16012
Handlebars: GHOST Low Rizer MTB 760 mm Rise 15 mm Dia. 31.8 mm
Stem: GHOST MTB Dia. 31.8 mm
Seat post: GHOST Light DC 1 31.6 mm
Saddle: Selle Italia X-Base
Front hub: Formula DC-711 15x110 mm
Rear hub: Formula DC-1248 12x148 mm
Front stroke: 120 mm
Footer : FRHG0022
Number of speeds: 11
Rear rim: Rodi Blackrock 622x21 mm 32H
Front rim: Rodi Blackrock 622x21 mm 32H
Front tire: Continental X-King PureGrip 29x2.2
Rear tire: Continental X-King PureGrip 29x2.2
KATO models can be supplied with MITAS casings. The manufacturer reserves the right to change and/or improve the design and components without prior notice.
Model year | 2019 |
Gears | 1x11 |
Groupset | Shimano SLX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 43686 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews