Ghost Kato 7, model 2015
With the Ghost Kato 7 mountain bike, you will be perfectly prepared for new challenges. Wheels with a diameter of 27.5 inches, a RockShox 30 Gold fork with a stroke of 120 mm and Shimano components with 30 gears make the Kato 7 a completely versatile and reliable bike that will surprise you with its agility and momentum.
Year - 2015
Frame - Kato 27.5 aluminum
Fork - Rock Shox 30 Gold RL 120 mm
Derailleur - Shimano XT 10-Speed
Derailleur - Shimano Deore
Shifting - Shimano Deore SL
Brakes - Shimano 355 Disc 180/160 mm
Cranks - Shimano Deore 40-30-22
Cassette - Shimano CS-HG50 11-36
Handlebars - GHOST Low Rizer light 700 mm 31.8 mm
Stem - GHOST AS-GH1 31.8 mm
Hubs - Shimano Deore QR
Rims - Ryde Rival 21
Tires - Schwalbe Rocket Ron 2.25
Saddle - GHOST VL 3315
Seat post - GHOST light SP DC1 31.6 mm
Number of speeds - 30
Wheel size - 27.5"
Weight - 12.2 kg
Front stroke - 120 mm
Model year | 2015 |
Material | aluminium |
product ID | 28361 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews