Ghost Kato 5.9 AL night black / titanium gray / riot red, model 2019
Material: Aluminum
Wheel size: 29
Fork: Rock Shox 30 Silver Poploc 100 mm
Derailleur: Shimano XT RD-M772 9-S
Cranks: Shimano Alivio FC-M4050 40-30-22
Brakes: Shimano BR-MT200 2/2 Piston 160 mm Disc
Front tire: Continental X-King 2.2
Rear tire: Continental X-King 2.2
Wheels: Rodi Excalibur XC 622x19
Front hub: Shimano FH-RM35 QR
Rear hub: Shimano FH-RM35 QR
Frame: KATO AL
Shifting: Shimano Alivio SL-M4000
Cassette: Shimano CS-HG-200-9 11-34
Handlebars: GHOST Low Rizer MTB 720 mm Rise 10 mm Dia. 31.8 mm
Stem: Ghost MTB 31.8mm
Seatpost: Ghost Light DC 1 31.6mm
Saddle: Selle Italia X-Base
Number of speeds: 27
Front lift: 100mm
Foot: EZ1954
Model year: 2019
KATO models can be supplied with MITAS casings. The manufacturer reserves the right to change and/or improve the design and components without prior notice.
Model year | 2019 |
Gears | 3x9 |
Groupset | Shimano XT, Shimano Alivio |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 63509 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
