Focus Raven 8.6 2019 mountain bike
Mountain bike with carbon frame, air lockable fork, with Sram Eagle 1x12 gears, with 29 "wheels.
Frame: Carbon frame, PF30 BB, 142x12 mm through axle, integrated cable guide, Post Mount 160 mm
Fork: RockShox Judy Gold, OneLoc, 15x100 mm
Cranks: Sram NX Eagle DUB, 32T
Middle composition: SRAM PressFit30
Derailleur: Sram NX, 12-speed
Gear levers: Sram NX Eagle
Cassette: Sram PG-1230 Eagle, 10-50T
Chain: SRAM eagle-NX
Brakes: Magura MT2 Plus
Brake levers: Magura MT2
Rims: RODI VIPER21 GEÖST
Ammunition : Novatec
Tires: Schwalbe Racing Ralph Performance 2.25
Handlebars: BBB, aluminum, flatbar, 720mm, rise: 0mm, backsweep: 9degree
Stem: BBB Race, aluminum, 31.8 mm
Head composition: Acros AIX-322 R1
Saddle: Focus Race SL
Seatpost: BBB, aluminum, 27.2 mm
Color: black
Gears | 1x12 |
Groupset | SRAM NX |
product ID | 86589 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews