Amulet 29 Shift 3.0 bike, bronze/black
Bike fitting discount 20 % (you will save 28 €)
Amulet 29 Shift 3.0 bike
New tube profiles for even lower weight and improved geometry bring great driving characteristics. Combined with the S-Ride 3x8 drivetrain and hydraulic brakes, the Shift 3.0 is a great choice for beginner cyclists.| Frame |
Amulet 29" alloy
|
| Fork |
Suntour XCT-30-DS 29
|
| Derailleur |
S-RIDE RD-M310
|
| Cassette |
Shimano CS-HG200-8
|
| Chain |
KMC 8SP
|
| Cranks |
Race-Light Sport+ 42/32/22
|
| Brakes |
Zoom Hydraulics Brakes
|
| Brake levers |
Zoom Hydraulics Brakes
|
| Rims |
Race-Light Alloy 32 holes, Double Wall
|
| Hubs |
NECO MS-38
|
| Tires |
Kenda K1162 29x2.10"
|
| Seat post |
Race-Light 27.2 mm
|
| Saddle |
RACE-LIGHT SPORT+
|
| Stem |
Race-Light 90 mm
|
| Handlebars |
Race-Light WGH 720 mm
|
| Pedals |
ALLOY WELGO M21
|
| Derailleur |
S-RIDE FD-M300
|
| Shift levers |
S-RIDE SL-M300
|
| Model year | 2022 |
| Gears | 3x8 |
| Groupset | Other |
| Size | M, L, XL |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Fork travel | 100 mm |
| Control type | mechanical |
| product ID | 181679 |
The size table is indicative, the exact measurements and geometry of the models can be found on the manufacturer's website.
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews