Marin Rift Zone Carbon 2 29 bike, blue/carbon
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 50 % (you will save 70 €)
Marin Rift Zone Carbon 2 29 bike
| Frame |
Unidirectional Carbon Fibre Front Triangle, Series 4 Alloy Rear End, 29” Wheels, 125 mm Travel, MultiTrac Suspension Platform, 148x12 mm Boost Thru-Axle, 73 mm Threaded BB w/ ISCG05 Tabs
|
| Fork |
Fox Performance 34 Float, 130 mm Travel, 3-Position Micro Adjust Compression Adjustment, Rebound Adjustment, 110x15 mm Kabolt Axle, 44 mm Offset
|
| Shock |
Fox Float with Reservoir, Performance Series, EVOL Air Spring, Climb Switch, Rebound Adjustment, Custom Tune, 210x50 mm, M8x30 mm Top, M8x25 mm Bottom
|
| Rear derailleur |
Shimano XT, 12-Speed, SGS
|
| Cassette |
Shimano SLX M7100, 12-speed, 10-51T
|
| Chain |
KMC X-12 Silver and Black
|
| Crankset |
FSA Gradient, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Mego EXO Spindle, Boost Spacing
|
| Front brake |
Shimano SLX, 4-Piston Hydraulic Disc, Brake 203 mm Rotor
|
| Rear brake |
Shimano SLX, 4-Piston Hydraulic Disc Brake, 180 mm Rotor
|
| Brake levers |
Shimano SLX Hydraulic, I-Spec EV
|
| Rims |
Marin Aluminium Double Wall, 29 mm Inner, Welded Joint, Disc Specific, Tubeless Compatible
|
| Front hub |
Shimano, 110x15 mm, Disc, 32H
|
| Rear hub |
Shimano, Microspline 148x12 mm, Disc, 32H
|
| Spokes |
14 g Black Stainless Steel
|
| Tires |
front: Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO, Tubeless Compatible
rear: Maxxis Aggressor 29x2.5", 3C Maxx Terra, EXO, Tubeless Compatible |
| Seat post |
TranzX, YSP23JL, 1x Remote, S: 125 mm, ML: 150 mm, XL: 170 mm, Ø 30.9 mm
|
| Saddle |
Marin Trail Speed Concept Pro
|
| Stem |
Marin CNC Stem, 35 mm, Ø 35 mm Bar Bore
|
| Handlebars |
Marin 35 mm 7000 Alloy Bar, 780 mm width, 5° upsweep, 8° backsweep
|
| Grips |
All New Marin Single Clamp Locking
|
| Headset |
FSA No 42/47, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
| Bottom bracket |
MEGAEVO BB, 73 mm BSA Threaded
|
| Shift levers |
Shimano SLX 12-speed, I-Spec EV
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x12 |
| Groupset | Shimano XT, Shimano SLX |
| Colour | blue/carbon |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 130 mm |
| Rear travel | 125 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 144959 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews