Marin Rift Zone Carbon 1 29 bike, red/carbon
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 20 % (you will save 28 €)
MARIN Rift Zone Carbon 1 29 bike
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
| Frame |
Unidirectional Carbon Fibre Front Triangle, Series 4 Alloy Rear End, 29" Wheels, 125 mm Travel, MultiTrac Suspension Platform, 148x12 mm Boost Thru-Axle, 73 mm Threaded BB w/ ISCG05 Tabs
|
| Fork |
Marzocchi Bomber Z2 29", Rail Damper with Sweep Adjustment, 130 mm Travel, Kabolt Bolt-On Axle, 44 mm Offset
|
| Shock |
Fox Float DPS, Performance Series, EVOL Air Spring, 3 Position Compression Adjustment, Rebound Adjustment, Custom Tune, 210x50 mm, M8x30 mm Top, M8x25mm Bottom
|
| Shifting |
Shimano SLX, 12-Speed, SL-7100R
|
| Derailleur |
Shimano SLX, 12-Speed, SGS
|
| Cassette |
SunRace, 12-Speed, 11-51T, ED Black
|
| Chain |
KMC X-12, Silver and Black
|
| Crankset |
New FSA GRID, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Mego EXO Spindle, Boost Spacing
|
| Brakes |
Shimano BL-MT401/BR-MT420, 4-Piston Hydraulic Disc Brake, 203/180 mm Rotor
|
| Rims |
Marin Aluminium Double Wall, 29 mm Inner, Sleeved Joint, Disc Specific, Tubeless Compatible
|
| Front hub |
Forged Alloy, 110x15 mm, Disc, 32H
|
| Rear hub |
Forged Alloy, 148x12 mm, Quad Sealed Bearings, Disc, 32H, Standard Freehub Body
|
| Spokes |
14g Black Stainless Steel
|
| Tires |
front: Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO, Tubeless Compatible
rear: Maxxis Aggressor 29x2.5", 3C Maxx Terra, EXO, Tubeless Compatible |
| Seat post |
X-Fusion Manic, 1x Composite Remote, 125 mm (S), 150 mm (M,L), 170 mm (XL), 30.9 mm diameter
|
| Saddle |
Marin Speed Concept
|
| Stem |
Marin 3D Forged Alloy, 35 mm
|
| Handlebars |
Marin Mini-Riser, 6061 Double Butted Aluminum, 780 mm Width, 28 mm Rise, 5º Up, 9º Back
|
| Grips |
Marin Single Clamp Locking
|
| Headset |
FSA No 42/47, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
| Bottom bracket |
Mego EXO 73 mm BSA
|
| Sex | Men, Unisex |
| Model year | 2022 |
| Gears | 1x12 |
| Groupset | Shimano SLX |
| Colour | black, red |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 130 mm |
| Rear travel | 120 mm |
| Dropper post | no |
| Shock type | Air |
| Control type | mechanical |
| product ID | 144958 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews