GT Sensor 29 Carbon Elite bike, gray
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 20 % (you will save 28 €)
GT Sensor 29 Carbon Elite bike
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
| Frame |
Sensor Carbon 29” Frame, 140 mm Travel, BSA 73 mm, LockR Pivots, Tapered Head Tube, Boost 12x148 Thru-Axle, UDH, 185x55 mm Trunnion Shock Mount, ISCG05
|
| Fork |
Marzocchi Bomber Z2, 150 mm, 15x110 Boost, 44 mm Offset
|
| Shock |
Marzocchi Bomber CR Coil
|
| Shifting |
SRAM SX Eagle, 12-speed
|
| Derailleur |
SRAM SX Eagle
|
| Cassette |
SRAM PG-1210, 11-50T
|
| Chain |
SRAM SX Eagle, 12-speed
|
| Crankset |
Truvativ Descendent 6K, Dub, 32T
|
| Brakes |
TRP Slate T4 Hydro Disc
|
| Brake discs |
203/180 mm Rotors
|
| Rims |
WTB ST i30 TCS 2.0, 32h, Tubeless Ready
|
| Seat post |
GT DropKick, 31.6 mm, (S - 125 mm, M - 150 mm, L/XL - 170 mm)
|
| Saddle |
WTB Silverado
|
| Stem |
GT Alloy, 45 mm
|
| Handlebars |
GT Alloy Riser Bar, 30 mm Rise, 780 mm Wide, 5° Rise, 8° Back
|
| Grips |
GT MTB
|
| Headset |
FSA No.42
|
| Bottom bracket |
SRAM DUB BSA
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x12 |
| Groupset | SRAM SX |
| Size | S, M, L, XL |
| Colour | gray |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 150 mm |
| Rear travel | 140 mm |
| Dropper post | yes |
| Shock type | Spring |
| Control type | mechanical |
| product ID | 220149 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews