Mongoose Guide Comp 2020 gravel bike, SAMPLE
Fork: Mongoose, 700C, aluminum steerer, 12 mm x 100 mm, thru axle
Cranks: Samox TAM31 -232, aluminum, 46 / 30T
Gear levers: Shimano TIAGRA ST-RS405, 2 x 10
Cassette: Sunrace, 10-speed, 11-32T
Chain: KMC X10
Derailleur: Shimano FD-4700, band clamp
Shimano TIAGRA RD-4601
Rims: WTB ST-19, aluminum double wall, 19 mm ID, 32H, tubeless compatible,
Hubs: Xposure, aluminum, ball bearing, 12 mm x 100 mm, 32H, 6-boltXposure, aluminum, ball bearing, 12 mm x 142 mm, 32H, 6-bolt
Brakes: Shimano BR-S405 flat mount, hydraulic, aluminum, 160 mm rotor
Stem: Xposure DieCast, Threadless, 90 mm / 100 mm, 7 °, 31.8 mm clamp
Head composition: Threadless, ZS44 / ZS56, retainer bearing
Handlebars: Xposure, aluminum, 450 mm - 510 mm width, 31.8 mm clamp
Brake Levers: Shimano TIAGRA ST-RS405,
Wires: 14G, stainless steel
Tires: Kenda Small Block, 700 x 47c, wire bead
Saddle: Mongoose adventure, steel rails
Seatpost : Xposure, aluminum, 350 mm, zero offset, 31.6 mm
Color: blue
Model year | 2020 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 96622 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews