Fuji JARI 2.5, model 2021, gray
Fork: Chromoly, tapered steerer, low-rider water bottle and rack mounts
Cranks: FSA Tempo, 46 / 30T
Middle composition: Sealed cartridge bearing
Derailleur: Shimano Claris
Derailleur: Shimano Altus
Gear: Shimano Claris STI, 2 x 8-speed
Cassette: Shimano HG31, 11-34T
Chain: KMC Z8.3
Wheels: WTB SX23 rims, Formula hubs, 32H, 14G spokes
Tires: WTB Riddler, 37-622, 30tpi
Brakes: Shimano Claris
Brake levers: FSA, 1 1/8 upper - 1 1/2 lower, integrated
Head composition: Oval Concepts 325, 6061 alloy, 31.8mm clamp, 125mm drop, 25 degree flare, 4 degree sweep
Handlebars: Oval Concepts 313, 3D-forged 6061, +/- 6 degree
Stem: Oval Concepts 300, suede
Grips: Oval Concepts 238, steel rails
Saddle: Fuji, alloy, 27.2mm
Seatpost: 12.05 kg
Model year | 2021 |
Gears | 2x8 |
Groupset | Shimano Altus, Shimano Claris |
Material | aluminium |
Brakes | Mechanical disc brakes |
product ID | 118852 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews