Fuji JARI 2.1 LTD, model 2021, silver
Fork: C10 carbon monocoque, tapered carbon steerer, 100x12mm thru-axle
Cranks: FSA Vero Pro, 48/33T
Central composition: Sealed cartridge bearing
Derailleur: Shimano Tiagra
Derailleur: Shimano Tiagra
Shifting: Shimano Tiagra STI, 2 x 10-speed
Cassette: Shimano HG500, 11-34T
Chain: KMC X10
Wheels: WTB ST i23 TCS rims, KT 12mm TA Dynamo, Formula rear hub, 32H, 14G spokes, tubeless compatible
Tires: Vittoria Revolution Tech 700x40 with reflective stripe
Brakes: Shimano Tiagra
Brake levers: FSA, 1 1/8 upper - 1 1/2 lower, integrated
Headstock: Oval Concepts 325, 6061 alloy, 31.8mm clamp, 125mm drop, 25 degree flare, 4 degree sweep
Handlebars: Oval Concepts 313, 3D-forged 6061, +/-6 degrees
Stem: Oval Concepts 300, suede
Grips: Oval Concepts 238, steel rails
Saddle: Fuji, alloy, 27.2mm
Seat post: 12.71 kg
Weight: Bikeman Composite with stainless hardware
Display: Racktime Eco 2
Model year | 2021 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 118850 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews