Cannondale Topstone Carbon Apex bike, carbon
Cannondale Topstone Carbon Apex 28 bike
Frame |
Topstone Carbon, Kingpin suspension system, SmartSense compatible, Proportional Response construction, 12x142 mm thru-axle, 27.2 dropper post ready, BSA 68mm threaded BB, DirectLine internal cable route
|
Fork |
Topstone Carbon, 1-1/8" to 1.5" steerer, 55 mm OutFront offset, flat mount disc, internal routing, 12x100 thru-axle, triple bottle/gear mounts, fender mounts
|
Cassette |
SRAM PG-1130, 11-42, 11-speed
|
Chain |
SRAM Apex, 11-speed
|
Cranks |
SRAM Apex 1, 40T
|
Brakes |
SRAM Apex Hydraulic Disc, 160/160 Centerline Rotors
|
Brake levers |
SRAM Apex Hydraulic Disc
|
Rims |
DT Swiss G540, 28h, 24 mm inner width
|
Hubs |
(F) Formula cartridge bearing, 12x100 mm centerlock / (R) Formula cartridge bearing, 12x142 mm centerlock
|
Spokes |
Stainless Steel, 14 g
|
Tires |
Vittoria Terreno Dry, 700 x 38c, tubeless ready
|
Seat post |
Cannondale 3, 6061 Alloy, 27.2 x 350 mm
|
Saddle |
Fizik New Aliante R5, S-alloy rails
|
Stem |
Cannondale 3, 6061 Alloy, 31.8 mm, 7°
|
Handlebars |
Cannondale 3, butted 6061 Alloy, 16 deg flare drop
|
Headset |
Integrated, 1-1/8" - 1-1/2"
|
Bottom bracket |
SRAM GXP
|
Shift levers |
SRAM Apex 1, 11-speed
|
Derailleur |
SRAM Apex 1, Long Cage
|
Extra |
wrap Fizik Solocush Soft, 3 mm / Cannondale Wheel Sensor / StrapRack Tool Carrier
|
Model year | 2022 |
Gears | 1x11 |
Groupset | SRAM Apex |
Size | S, M, L, XL |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 188732 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews