Kellys Whip 10, 2019 model
frame size M / L
SR SUNTOUR XCT fork, 100mm, coil spring
head. composition semi-integrated
medium cartridge composition (118mm)
SAMOX cranks (34) - length 170mm
shifting SHIMANO SL-M310 Rapidfire Plus rear
shifter SHIMANO Acera M360 (direst mount)
number of gears 7
cassette pinion SHIMANO CS-HG200-7 (12-32)
KMC Z7 chain (106 links)
C-Star CX7 Mechanical Disc brakes
brake discs front 160mm / rear 160mm
APSE brake levers
brake cables DRIVING Force SCS (SlickCableSystem)
hubs KT Disc (32 holes)
rims KLS Draft Disc 559x19 (32 holes)
stainless steel string
tires SCHWALBE Nobby Nic Performance 57-559 (26x2.25)
stem KLS 45 mm
handlebars KLS 740mm
KLS Advancer handles
seatpost KALLOY - diam 30.9mm / length 300mm
KLS Vader saddle
pedals HT Pedals - nylon composite
chain guide accessories Mozartt Presto, ISCG 05
Model year | 2019 |
Gears | 1x7 |
Groupset | Shimano Acera |
Material | aluminium |
Brakes | Mechanical disc brakes |
product ID | 70797 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews