GT Slammer 20" bike, raw
GT Slammer 20" bike
| Frame |
GT FS Design, Hi-Ten Steel Tubes, DT Gusset, American BB, Seat Stay Mounted U-Brake, External 1-1/8" H / T, w / Removable Rotor Tabs, Odyssey Springfield Brake compatible
|
| Fork |
GT FS Design, Hi-Ten 31.8- 28.6 mm Tapered OD Blades, 31 mm Offset, 3/8" Axle dropouts
|
| Cassette |
9T Cassette
|
| Chain |
KMC Z410
|
| Cranks |
GT Tubular CR-MO 3pc., 170 mm Arms, Cold Forged CR-MO 19 mm x 8T spline Spindle, 25T GT Steel Chain Wheel
|
| Brakes |
Rear SST ORYG Detangler, Aluminum U-Brake w / Soft Compound Pad
|
| Rims |
Alloy single wall, 20" 36h
|
| Hubs |
Steel Body, Loose Ball 3/8" x 150 mm Heat Treated Axle, 15 mm Nut front, Alloy Body, 1 Loose Ball, 4 Sealed Bearing 14 mm x 180 mm Axle, 9T Cassette, 36 Hole, 17 mm Nut rear
|
| Tires |
Innova, 20 x 2.3" front, 2.2" rear
|
| Seat post |
Alloy, 25.4 mm x 200 mm
|
| Saddle |
Integrated saddle w / post
|
| Stem |
New GT Top Load, 1-1/8" , Cold Forged Cap, 32 mm Rise, 40 mm Length
|
| Handlebars |
GT Freestyle 2pc., Steel, 8.375" H x 28" W, 3 ° Up, 11 ° sweep
|
| Headset |
1-1 / 8" Threadless, Steel
|
| Bottom bracket |
American Loose Ball Bearing
|
| Pedals |
GT Low Profile FS Platform Design, PP Material, Boron Axle
|
| Spokes |
Stainless Steel, 14g
|
| Sex | Men, Unisex |
| Model year | 2019 |
| Gears | 1x1 |
| Groupset | Other |
| Colour | raw |
| Material | steel |
| Wheel diameter | 20" |
| Brakes | Other |
| Fork | Rigid |
| product ID | 73744 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
dobry den kolko ma asi tato bmx kilogramov prosim
Dobrý deň,
Výrobca žiaľ hmotnosť neuvádza a nemáme ju na predajni aby sme ju mohli zvážiť. Našiel som na zahraničnej stránke hmotnosť 11,5 kg ale nevieme Vám potvrdiť či to je správny údaj.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews