GT Slammer 20 bicycle, blue
GT Slammer 20 bike
GT Slammer 2021 is a universal freestyle BMX bike suitable for beginners or moderately advanced riders, from a height of approx. 150 cm. It has a quality frame designed by professional GT riders with Hi-ten steel tubes and a fork. Thanks to the universal geometry, it is suitable for all BMX disciplines - Street, Park, Dirt. The bike is equipped with high-quality components for this category - such as three-part Cr-Mo cranks with an octagonal axis, suitable for BMX classic 25/9 teeth. The popular TWISTER is also part of the equipment.| Frame |
Hi-Ten Steel Tubes, DT Gusset, American BB, Seat Stay U-Brake, 1-1 / 8" H / T, w/ Removable Rotor Tabs
|
| Fork |
GT FS Design, Hi-Ten 2pc. steerer & Tapered Legs, 31 mm offset, 3/8" Axle dropouts
|
| Cassette |
9T 1pc. Driver
|
| Chain |
KMC Z410
|
| Cranks |
GT Power Series Cr-Mo 3pc., 170 mm Arms, 19 mm x 8T Cr-Mo Spindle, GT 25T Steel chainwheel
|
| Brakes |
Aluminium U-Brake w / Soft Compound Pad
|
| Rims |
Alloy Single Wall, 36h
|
| Spokes |
Stainless Steel, 14 g
|
| Tires |
Innova 20 x 2.2" Innova 20 x 2.3"
|
| Seat post |
Alloy, 25.4 mm x 200 mm
|
| Saddle |
Railed
|
| Stem |
GT Top Load, 1 -1/8" , Cold Forged Cap, 32 mm Rise, 40 mm
|
| Handlebars |
GT Freestyle 2pc., Steel, 8.375" H x 28" W, 3 ° Up, 11 ° Back
|
| Headset |
1-1 / 8" Threadless, Steel
|
| Pedals |
GT Low Profile FS Platform Design
|
| Extra |
Twister
|
| Sex | Men, Unisex |
| Model year | 2021 |
| Gears | 1x1 |
| Groupset | Other |
| Colour | blue |
| Material | steel |
| Brakes | Cantilever |
| Fork | Rigid |
| product ID | 121107 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews