GT Performer 20.5, model 2020, black
GT Performer 20.5 2020 is a universal Freestyle BMX bike suitable for beginners or advanced junior riders with a height of over 165 cm.
Frame: GT FS Design, Hi-Ten Steel Tubes, DT Gusset, MID BB , Seat Stay Mounted U-Brake, Integrated 1-1/8" H/T w/ Removable Rotor Tabs, Odyssey Springfield Brake compatible
Fork: GT FS Design, Hi-Ten 2pc. Steerer & Tapered Legs, 31mm Offset, 3/8" Axle Dropouts
Cranks: GT Power Series Cr-Mo 3pc., 170mm Arms, 19mm x 8T Cr-Mo Spindle, GT 25T Steel Chainwheel
Cassette: 9T Sealed 1pc. Driver
Chain: KMC S1
Rims: Alloy Single Wall, 36h
Hubs: Alloy Body, Sealed Bearings 3/8" Axle, 36h, 15 mm NutAlloy Body, 1 Loose Ball, 4 Sealed Bearing 14 mm x 165 mm Axle, 9T Cassette, 36h, 17 mm Nut
Tip: Stainless Steel, 14 g
Pedals: GT Low Profile FS Platform Design, PP Material, Boron Axle
Brakes: Aluminum U-Brake w/ Soft Compound Pad
Stem: GT Top Load, 1-1/8", Cold Forged Cap, 32mm Rise, 50mm
Head Composition: 1 1/8" Integrated Design, 45X45 Degree Sealed Bearings
Handlebars: GT Freestyle 2pc., Steel, 8.5"H x 29"W, 3°Up, 11° Back
Brake levers: Alloy
Tyres: GT LP-5 20 x 2.35" GT LP-5 20 x 2.2"
Saddle: GT Pivotal Padded
Seat post: Alloy Pivotal 25.4 x 200 mm
Weight: 11.9 kg
Model year | 2020 |
Gears | 1x1 |
Groupset | Other |
Material | steel |
Brakes | Road rim brakes |
product ID | 100739 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews