GT Performer 20.5" bike, gray
GT Performer 20.5" bike
| Frame |
GT FS Design, Hi-Ten Steel Tubes, DT Gusset, MID BB , Seat Stay Mounted U-Brake, Integrated 1-1/8″ H/T w/ Removable Rotor Tabs, Odyssey Springfield Brake compatible
|
| Fork |
GT FS Design, Hi-Ten 2pc. Steerer & Tapered Legs, 31mm Offset, 3/8″ Axle Dropouts
|
| Cassette |
9T Sealed 1pc. Driver
|
| Chain |
KMC S1
|
| Cranks |
GT Power Series Cr-Mo 3pc., 170 mm Arms, 19 mm x 8T Cr-Mo Spindle, GT 25T Steel chainwheel
|
| Brakes |
Aluminum U-Brake w/ Soft Compound Pad
|
| Brake levers |
ALLOY
|
| Rims |
Alloy Single Wall, 36h
|
| Hubs |
Alloy Body, Sealed Bearings 3/8″ Axle, 36h, 15 mm NutAlloy Body, 1 Loose Ball, 4 Sealed Bearing 14 mm x 165 mm Axle, 9T Cassette, 36h, 17 mm Nut
|
| Spokes |
Stainless Steel, 14g
|
| Tires |
GT LP-5 20 x 2.35″ GT LP-5 20 x 2.2″
|
| Seat post |
Alloy Pivotal 25.4 x 200 mm
|
| Saddle |
GT Pivotal Padded
|
| Stem |
GT Top Load, 1-1/8″, Cold Forged Cap, 32mm Rise, 50mm
|
| Handlebars |
GT Freestyle 2pc., Steel, 8.5″H x 29″W, 3°Up, 11° Back
|
| Grips |
GT Super Soft 155 mm Single Compound w/o Flange w/ GT removable plug
|
| Headset |
1 1/8″ Integrated Design, 45x45 Degree Sealed Bearings
|
| Pedals |
GT Low Profile FS Platform Design, PP Material, Boron Axle
|
| Sex | Men, Unisex |
| Model year | 2020 |
| Gears | 1x1 |
| Groupset | Other |
| Colour | gray |
| Material | steel |
| Wheel diameter | 20" |
| Brakes | Road rim |
| Fork | Rigid |
| product ID | 98542 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Dobrý deň, zaujíma ma či by bol tento bicykel vhodný pre postavu 178cm a váhu 66kg. Akú má toto bmx hmotnosť ?
Dobrý deň, bohužiaľ bajk je vhodný pre postavu okolo 160cm
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews