GT Air BMX bike, model 2015 Gloss Black
Frame- G2015 GT BMX Design, Hi-Ten Steel Tubes, DT Gusset, American BB, Seat Stay Mounted U-Brake, External 1-1/8" H / T, Odyssey Springfield Brake compatible
Fork - GT BMX Design, Hi-Ten 31.8- 28.6mm Tapered OD Blades, 3/8" Axle dropouts.
Brakes - Aluminum U-Brake
Brake levers - Alloy
Cranks- GT Tubular CR-MO 3PC., 165mm Arms, Cold Forged CR-MO 19mm x 8T Spline Spindle, 25T steel Chain Wheel GT Design
Central composition - American Loose Ball Bearing
Cassette- 9T cassette
Rims- F: Steel Body, Loose Ball 3/8" Heat Treated Axle, 36 Hole, R: Alloy 1 Sealed Bearing 14mm 9T Cassette 36 Hole
Hubs- F: Steel Body, Loose Ball 3/8" Heat Treated Axle, 36 Hole, R: Alloy 1 Sealed Bearing 14mm 9T Cassette 36 Hole
Tires- GT Air Bags, 20" x2.1" F / R
Chain- KMC Z410
Handlebars- H: 8" (203mm), W: 27.5" (700mm), w/ 19mm Crossbar, 2° up, 10° back
Stem - GT INVERT Top Load Design With Cold Forged Clamp, 40mm Ext
Head composition- 1-1 / 8" Thread less, Steel
Pedals - GT Low Profile Mid Size Platform Design, PP Material, Boron Axle
Saddle - railed saddle
Seatpost - Steel 25.4mm x 200mm
Model year | 2015 |
Material | steel |
product ID | 9072 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews