Lapierre SHAPER 100 W, model 2020
Have you decided to start road cycling? Then the Lapierre Shaper fitness model will be a great stepping stone for you. A stable, comfortable and reliable frame is built for fast riding on asphalt cycle paths and in the city. The frame is made of patented Supreme 4 aluminum alloy.
Material: Aluminum
Wheel size: 700x35C
Frame: SHAPER WOMEN SUPREME 4 ALLOY
Fork: SHAPER ALLOY FORK
Derailleur: SHIMANO ARDM310DL, 7s
Cranks: SHIMANO FC-TY301, FOR REAR 6 / 7/8 48X38X28T, W / CG 170 (S, M), 175 (L)
Cassette: SHIMANO CS-HG200 7s 12-32T
Chain: YABAN YBN S50 1/2" x3 / 32" 110L 7/8-SPD
Brakes: V-BRAKE SET HJ-721 ADX BLACK ALLOY
Shifting: SHIMANO ASTEF500 V-BRAKE 3x8s
Headstock: FSA No.10, ED 1-1/8"
Handlebars: ALLOY BLACK AL6061, Barbora: 31.8mm, W: 620mm
Grips: Lapierre GRIPS
Stem: Lapierre 17 ° 80 mm
Seatpost : Lapierre 27.2x350mm
Saddle: SELLE ROYAL SHADOW
Front hub: SHIMANO TX500
Rear hub: SHIMANO TY500
Rims: FREEWAY D-WALL
Tires: MITAS FLASH 700x35C 37-622
Pedals: XERAMA SP-822N
Derailleur: Shimano Tourney AFDTY710TSL3 LOW CLAMP 34.9mm
Model year | 2020 |
Gears | 3x7 |
Groupset | Shimano Tourney |
Material | aluminium |
Brakes | V-brakes |
product ID | 88326 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews