Kellys Phanatic 40, model 2020
fork SR SUNTOUR NEX HLO, 75mm, coil / Speed Lockout
semi -integrated main composition
medium cartridge composition ( 122.5mm )
cranks SHIMANO Acera T3010 (48x36x26T) - length 175mm (M - L)
SHIMANO Alivio SL-M4000 Rapidfire Plus
derailleur SHIMANO Acera T3000 (31.8mm)
SHIMANO Alivio M4000 converter (direct mount)
number of transfers 27
cassette pinion SHIMANO CS-HG300-9 (11-34T)
KMC X9 chain (114 links)
brakes SHIMANO MT200 Hydraulic Disc
brake discs front 160mm / rear 160mm
SHIMANO BL-MT200 brake levers
hubs SHIMANO Dynamo 3D37 / SHIMANO TX505 Disc Center Lock (32 holes)
rims KLS Draft Disc 622x21 (32 holes / riveted)
string stainless steel black
tires SCHWALBE CX Comp - Puncture Protection 40-622 (700x38C) ReflectiveLine
stem KLS CRX 70 adjustable - diam 28.6mm / bar bore 31.8mm / length 95mm (M - L)
handlebars KLS CRX 70 RiseBar - diam 31.8mm / rise 25mm / width 640mm (M), 660mm (L)
handles KLS Token 2Density
seatpost KLS Active - diam 27.2mm / length 350mm
saddle SELLE ROYAL Vivo
NonSlip - alloy pedals
front lighting BÜCHEL Urban Halogen
rear light BÜCHEL LED Standlight
fenders RPZ
accessories stand, bell
Model year | 2020 |
Gears | 3x9 |
Groupset | Shimano Alivio, Shimano Acera |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 89502 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews