GT Transeo 4.0 2017 dark silver / silver trekking bike
Frame: GT Transeo Triple Triangle 6061 series alloy, smooth welded, and hydroformed (TT, DT), forged drop-outs, chainstay disc mounts, all utility Brage ons
Fork: SR Suntour NVX-DS HLO 75mm travel, pre-load adjust, Hydraulic Lockout, disc specific, fender mounts
Cranks: Alloy forged, 48/38/28
Middle composition: Cartridge sealed
Gear levers: Shimano Altus 8-speed Rapid Fire Plus
Cassette: Sunrace 8-speed cassette 11-32t
Chain: KMC Z72
Derailleur: Shimano TY710
Derailleur: Shimano Altus
Rims: JALCO JD200 Double Wall Alloy, 32h
Hubs: Formula, (F) Disc 32h, (R) Disc 32h Freehub
Pedals: High Impact nylon platform
Brakes: (F&R) Tektro Mechanical Disc brake, 160mm rotor
Stem: all new 3D forged GT alloy stem
Head composition: Threadless Ahead
Brake levers: Shimano EF-500
Handlebars: GT Type R flat riser bar, 31.8x640mm
Tires: (F&R) 700x35C Innova LandTracker w / puncture protection
Saddle: GT saddle
Seatpost: Alloy one bolt seat pillar
Color: dark silver / silver
Model year | 2017 |
Gears | 3x8 |
Groupset | Shimano Altus |
Material | aluminium |
Brakes | Mechanical disc brakes |
product ID | 33935 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
