GT meatball urban bike, model 2015
Rám- GT meatball triple triangle frame, track ends with replaceable steel reinfoced plates
Vidlica- GT Baller street fork with alloy steerer, alloy blades
Kľuky- FSA Vero Track crank 46T alloy ring
Stredové zloženie- Tange Seiki alloy press-in Aheadset
Pedále- GT Nylon platforms
Kazeta- SRAM 21T
Reťaz- KMC Z510
Ráfiky- GT Baller 30mm tall aero
Plášte- Schwalbe Kojak 700x35C slicks
Náboje- (F) GT Mohawk high FLANGED sealed bearing, track Nutz, (R) SRAM Automatix 2spd auto shifting coaster brake hub, black
Špica- Stainless paint to match
Brzdy- Tektro (F / R)
Brzdové páčky- Tektro hinged
Riadidlá- GT Baller Street fighter riser bar 35mm x 550mm
Predstavec- GT 3D forged paint to match
Hlavové zloženie- Tange Seiki sealed
Sedadlo- GT
Sedlovka- GT Alloy micro adjust
Sedlová objímka- GT
Farby- olivová zelená
| Model year | 2015 |
| Material | aluminium |
| product ID | 6366 |
| Size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews